Evolve Showerstart Pull Cord Shower Start Shower Head
Pull Cord
USD $18.99
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
The evolve ShowerStart is the eco-friendly solution to
saving water and knowing the right time to hop into the shower. The
evolve ShowerStart uses an integrated temperature sensor to detect
when the water reaches the best temperature for showering and slows down
the water flow so hot water isn't wasted, saving you water, time,
energy, and money. Simply attach the ShowerStart to your showerhead
and you'll start saving water and energy while eliminating the
guesswork of when your shower is ready. ShowerStart® prevents hot water waste during shower warm up Stops water flow when temperature reaches 95°F and resumes flow when cord is pulled Attaches to shower arms with 1/2-inch NPT male fittings
The ShowerStart installs between your showerhead and shower pipe. When you turn on your shower, the showerhead adapter allows the water to run until the temperature reaches 95°F. At that point, the adapter slows the flow down to a trickle until you pull on the cord to begin showering. This process saves you from spending excess money and energy on hot water that you aren't using and removes the guesswork out of wondering when your shower is ready.
ContentsShowerStart Pull cord Plumber's tape
Installation Details
The ShowerStart can be easily installed onto your shower pipe. Stretch plumber's tape the screw threads on the shower pipe to create a solid seal. Tighten the ShowerStart by turning it clockwise into position. Finally, apply plumber's tape over any exposed threads and tighten the shower head onto the head. NOTE: The ShowerStart is not an anti-scald device: Lower water heater to a maximum of 120° F (49° C). Always resume water flow and check water temperature before entering shower. Tankless systems require a minimum flow rate to produce hot water. When this product is used with some tankless systems a brief, yet noticeable change in the shower's temperature may occur shortly after resuming the shower's normal flow.
Product FeaturesTrickle mode activated when water reaches 95° F (35° C) Automatically resets after each shower Attaches to any shower arm with industry standard 1/2" fittings Solid brass fittings Designed for use in homes with water pressure of 30 PSI
The ShowerStart installs between your showerhead and shower pipe. When you turn on your shower, the showerhead adapter allows the water to run until the temperature reaches 95°F. At that point, the adapter slows the flow down to a trickle until you pull on the cord to begin showering. This process saves you from spending excess money and energy on hot water that you aren't using and removes the guesswork out of wondering when your shower is ready.
Contents
Installation Details
The ShowerStart can be easily installed onto your shower pipe. Stretch plumber's tape the screw threads on the shower pipe to create a solid seal. Tighten the ShowerStart by turning it clockwise into position. Finally, apply plumber's tape over any exposed threads and tighten the shower head onto the head. NOTE: The ShowerStart is not an anti-scald device: Lower water heater to a maximum of 120° F (49° C). Always resume water flow and check water temperature before entering shower. Tankless systems require a minimum flow rate to produce hot water. When this product is used with some tankless systems a brief, yet noticeable change in the shower's temperature may occur shortly after resuming the shower's normal flow.
Product Features
Price type
IN STOCK
OUT STOCK
.
