Ashwanth 8”rain Shower Head

Step 1: Make sure the gasket is inside the connection port and use sealing tape around the pipe thread adapter.
Step2: Attach 3-way diverter to shower arm by rotating the bolt clockwise by hand.
Step3: Attach extension arm to 3-way diverter. Ensures use hexagon wrench to tighten free spinning locking collar.
Step4: Attach rain shower head to extension arm.
Step5: Attach shower hose to 3-way diverter and water flow regulator.
Step6: Attach water flow regulator to shower hose.
Step7: Stick the bracket to the wall.
Note: To fit the parts more tightly, a wrench is required to assist in tightening each connector
11’’ Extension Shower Head Arm
1.180 degree adjustable: free to choose the best height for shower.
2.Gear Joint : Hand the square rainfall shower head tightly and safety
3.spinning locking collar: Easy to install and will not hart hand
5FT Stainless Steel Hose
1.Lightweight, flexible and no tangle
2.Comes complete with washers and is easy to install with hand tight.
3.The round port is connected to the hand shower, and the hexagonal port is connected to the tee
installation assistance tool
1. Use a wrench to tighten each connection port to help prevent leaks
2. Use with the sealing tape included in the kit
3. Note: The wrench is not included in the picture
Shower bracket installation
1. Dry the water stains and tear off the tape behind the stand
2. Paste in the appropriate position, do not change the position after pasting
3. Put into use 24 hours after pasting

Returns Accepted for this item if it's within 30 Days